Manual

Director Element Manager user guide 97
Configuring switch binding
For complete procedures on configuring this optional feature, see ”SANtegrity features” on
page 187.
Configuring SANtegrity Authentication
The Security feature is accessed from the SANtegrity Authentication dialog box in the individual
element managers applications. The element manager lets you manage one device at a time.
Access the SANtegrity Authentication dialog box by selecting Configure > SANtegrity
Authentication. The Configure Security Authentication dialog box is displayed (Figure 33).
Figure 33 Configure Security Authentication dialog box
To access the SANtegrity Authentication, one user must have the security administrator privilege. If
not, the Security tab is hidden. By default, the security administrator user group is displayed when
installing this feature.
The upper right part of the window shows the main working area, where the security administrator
configures the authentication security settings.
The lower left part of the window shows the regular master log and the lower right part of the
window shows the security log.
NOTE: The SANtegrity Authentication dialog box is only available to the security administrator so
the Security Log is only available to the security administrator.
Change the default size of the display by placing the cursor on the divider until a double arrow is
displayed. Click and drag the adjoining divider to resize the window. You can also show or hide an
area by clicking the left or right arrow on the divider.