Manual

Director Element Manager user guide 35
• Enable Call Home Notification—Enables the call-home function for the switch. The
parameters of the call-home feature are configured in Windows
®
. See the HP StorageWorks
HA-Fabric Manager Appliance installation guide for instructions.
For additional information on using this option, see ”Enabling or disabling Call Home
Notification” on page 171.
• Backup and Restore Configuration—Saves the product configuration stored on the switch
to the HAFM appliance hard disk or to restore the configuration data from the appliance. Only
a single copy of the configuration is kept on the appliance.
This backup is primarily for single-control processor (CTP) systems, where a backup is needed to
restore the configuration data to a replacement CTP card. Note that you cannot modify the
location or the file name of the saved configuration.
For additional information on using this option, see ”Backing up and restoring configuration
data” on page 147.
NOTE: You can only restore the configuration to a director with the same IP address.
• Reset Configuration—Resets all switch configuration data back to the factory defaults.
When you choose this option, a confirmation dialog box is displayed with a warning. For
additional information on using this option, see ”Resetting the configuration” on page 174.
CAUTION: This operation resets all configurations, including any optional features that
have been installed. After resetting the configuration, you will need to re-enter your feature
key to enable all optional features.
Help menu
Select the Help menu on the menu bar to display a list of the following Help options.
• Contents—Displays the Help window. The Help window opens with the Contents menu
visible. You can click the Index pane or click the Search icon to conduct a search. The help text
provides buttons and hypertext—linked items to help you navigate quickly through information.
Use the forward (>) and back (<) buttons to scroll forward and backward through the displayed
help frames. Exit the Help feature at any time by clicking the Close icon at the top of the Help
window.
• About—Displays the version number for the Element Manager and copyright information.
View tabs
Select one of the view tabs across the top of the Element Manager window to display the following
views in the View panel.
• Hardware
• Port List
• Node List
• Performance