User Manual

Monitoring and Managing the Switch
82 Edge Switch Element Manager User Guide
Displaying Node Properties
Open the Node Properties dialog box by double-clicking a row in the Node List
View or right-clicking a row and clicking Node Properties.
Figure 21: Node Properties dialog box
The Node Properties dialog box contains the following options:
■ Port Number—The physical port number on the switch to which the node is
connected.
■ Node Type—The type of port, as supplied by the attached port.
■ Fibre Channel Address—The 3-byte address of the node or the ALPA for
private loop devices.
■ Port WWN—Port WWN of the attached device.
■ Port Nickname—Nickname for the port WWN. Must be configured to
display.
■ Node WWN—Node WWN of the attached device. Must be configured to
display.
■ Node Nickname—Nickname for the node WWN.
■ Unit Type—Type of device. For a list of options, see “Unit Type—The
following information, if supported, is supplied by the attached device:” on
page 80, under “Node List View Parameters” on page 79.
■ Node Port Number—Physical port number on the attached node (if supplied
by the device).