User Manual

Monitoring and Managing the Switch
63Edge Switch Element Manager User Guide
■ Click on a connector, port row, or bar graph in the preceding views or click
Product > Port > Port Properties.
Figure 11: Port Properties dialog box (Edge Switch 2/32)
Port Properties Parameters
The Port Properties dialog box provides the following information in each of the
listed fields:
■ Port Number—The physical port number.
■ Port Name—User-defined port name or description. See “Configuring Ports”
on page 115 for instructions.
■ Type—Displays the port type, as follows:
— G_port—Displays if nothing is logged into the port or the port is
configured to be a G_Port.
— F_Port—Displays if a device is logged into the port or the port is
configured to be an F_Port.
— E_Port—Displays if the port is connected to another switch’s E_Port
through an ISL or the port is configured to be an E_Port.
— FL_Port—Displays if a loop device is logged into the port.
— FX_Port—Displays if the port is configured to be an FX_Port.
— GX_Port— Displays if the port is configured to be a GX_Port.