Owner's manual

show acl_entry

Description Shows the access control lists for all initiators on a speciﬁed iSCSI target,

or on all targe

ts.

NOTE:

If access cont

rols are disabled, a message is displayed.

Syntax show acl_entry [target=<target>]

Operands target=<target>

[Optional] Limits the display to the ACL entries for a speciﬁctarget,

indicated by the target alias name. If this operand is not used, the complete

ACL is displayed.

Example

CLI> show acl_entry

ACL enabled on Target target1

Initiator Alias Accessible Mapped LUNs

--------------- -----------------

initiator1 lun1t1