User's Manual

Troubleshooting630
Solaris host VxVM If you discover a host with any typical SAN disk groups off line, the
storage volume page shows SAN mount points as local instead of
external. These disks, however, are not accessible.
When you perform Discovery Data Collection/Get Details with all
disk groups online, disks on the SAN are shown as external. Hosts
connected directly to a storage system are shown as local, except for
hosts connected by fibre. Hosts connected directly to a storage system
through fibre are shown as external.
Windows
host
VxVM When a Windows host with VxVM is used, the SCSI bus number is
always reported to be one in the SCSI bus column of the Disk Drives
page.
Any host NA The Unmounted Volume field under Capacity Summary automatically
displays 0 MB if you discovered the host but not the storage system
connected to it. This may occur if you did not enter the IP address of
the storage system when performing discovery and/or your license
does not allow you to discover a particular storage system. See the
Supported Elements section in the “List of Features” to determine
which storage systems you can discover. The “List of Features” is
accessible from the Documentation Center (Help > Documentation
Center in Storage Essentials).
Table 140 Known Device Issues (continued)
Device Software Description