User's Manual

Operations 85
ControllerPassword= MyBootTimePasswd ; optional
Firmwarelock= On ; optional
EncryptionRecoveryQuestion=This is my question ; optional
EncryptionRecoveryAnswer=This is my answer ; optional
Encryption configuration
When the controller encryption settings are configured, HP SSA Scripting can be used to change some
encryption parameters. The actual parameters to be changed vary based on the controller capabilities and
the version of controller firmware.
Action= Reconfigure
Method= Custom
Controller= SLOT 1
; first, log in
EncryptionUser= crypto
EncryptionPassword= Password.12345
; now change the parameters
FirmwareLock = Off
AllowPlainText= false
When creating volumes, you can set an additional volume option to determine whether the volume will be
encrypted or plaintext. You must first log in as the Crypto Officer user to use this feature. By default, volumes
are encrypted.
Action= Configure
Method= Custom
Controller= SLOT 1
EncryptionUser= crypto
EncryptionPassword= Password.12345
Array= A
Drives= 1
LogicalDrive= 1
RAID= 0
PlainText= Enable
This example converts an existing plaintext volume to cyphertext, without preserving data.
Action= Reconfigure
Method= Custom
Controller= SLOT 1
EncryptionUser= crypto
EncryptionPassword= Password.12345
Array= A
LogicalDrive= 1
Encode= DestroyData