User's Manual

Operations 109
Error code Error message Comment or clarification
free space for the requested size
3011
Cannot extend logical drive, requested size
is too small
—
3012
Cannot specify both SIZE and SHRINKSIZE The input file cannot specify both a SIZE and
SHRINKSIZE parameter.
3013
Cannot shrink Array The array shrink operation was not successful.
3014
Cannot move Array The array move operation was not successful.
3015
Invalid operation - Advanced Pack support
required
The requested operation requires a valid license key
to be entered.
3016
Spare drives cannot be specified by a count
in Reconfigure mode
When in Reconfigure mode, the requested spare
drives must be specified by their addresses. A simple
count cannot be used.
3017
Disk drives cannot be specified by a count in
Reconfigure mode
When in Reconfigure mode, the requested data
drives must be specified by their addresses. A simple
count cannot be used.
3018
Invalid number of physical disks —
3019
Cannot create Array - no physical disks
specified
HP SSA cannot create an array unless physical disks
are specified in the input file DRIVE parameter.
3020
SSP must be enabled in order to perform this
operation
For the specified operation, HP SSA requires SSP to
be supported and enabled.
3021
Invalid connection name —
3022
The connectionname cannot be removed
when the hostmode has a non-default
value.
—
3023
Invalid Host Mode —
3024
Invalid Adapter ID —
3025
This controller does not have host mode
modification capability
—
3026
You need to have administrator rights to
continue
—
3027
Another instance of HP SSA is already
running (possibly a service). Please
terminate the HP SSA application before
running HP SSA scripting.
—
3028
Invalid Drive Cache setting. Valid options
are ENABLE and DISABLE.
—
3029
Invalid or out of order Command Verify the ordering of the commands in the input
configuration file.
3030
Invalid or missing Array for Reconfigure Expecting a valid array in Reconfigure mode
3031
Invalid or missing Filename for Firmware
Update
The firmware filename supplied is not a valid
filename.
3032
Firmware Update Failed The firmware flash operation on the controller failed.
3033
This controller has been configured with a
more recent version of software. To prevent
data loss, configuration changes to this
controller are not allowed. Please upgrade
to the latest version to be able to continue to
configure this controller.
Some changes to SOULAPI are not
backward-compatible. This check prevents the use of
an older version of software on a controller
configured with a newer version, possibly overriding
changes and destroying data.