User's Manual

Operations 108
Error code Error message Comment or clarification
or logical drive.
2854
Invalid SSP Adapter ID The adapter ID is not a valid adapter ID that was
detected by the controller.
2857
Invalid Surface Scan Delay —
2861
Controller does not support redundancy
settings
The controller is not redundant or does not support
redundancy settings.
2864
Invalid Preferred Path Mode The specified value for the preferred path mode is
not valid, or the controller is not available.
2865
Invalid Preferred Path The specified preferred path is not a valid chassis
slot for an available, active controller, or the
controller is not available.
2866
Failure opening capture file —
2867
Failure opening input file —
2868
Failure opening error file —
2877
There are no suitable spares available
HP SSA found no drives that could be used as spares
for the specified array.
2880
Invalid Physical Disk Type Specified —
2882
Invalid MNP delay The specified value for MNP delay is invalid.
2883
Invalid Cache Logical Drive The specified caching logical drive ID is invalid.
2884
Invalid Caching Array The specified caching array ID is invalid.
2885
Error creating Caching Logical Drive —
2886
Error creating Caching Array —
2887
Error modifying Caching Volume —
2888
Unable to modify Caching Arrays Caching arrays cannot be modified once created.
2889
The requested Array modification is invalid Error specifying the list of drives when reconfiguring
an array
3000
Invalid Option The value of the option supplied to this parameter is
invalid.
3001
Invalid Command The command is invalid.
3002
Command Failed The controller returned an error for a command.
3003
License Key Delete Failed HP SSA is unable to delete the license key.
3004
Invalid Sector Size —
3005
Cannot delete Array —
3006
Invalid Number of Parity Groups —
3007
Chassis name is too long —
3008
Chassis name is already in use Another controller is already using the entered
chassis name.
3009
Auto Configure failed The Auto Configure mode was unable to complete
auto configuration.
3010
Cannot extend logical drive, not enough —