Installation Manual

4. To launch ORCA, enter the drvcfg -s <dh> <ch> command. For example:
fs1:\P411> drvcfg -s 27 29
Set Configuration Options
NOTE: In order for ORCA to launch, at least one disk must be connected to the Smart Array
controller.
NOTE: In order for ORCA to launch, there must be 32 or fewer logical drives. If more than
32 logical drives are defined, a warning appears indicating that the number of logical drives
that can be handled by ORCA has been exceeded.
The ORCA main menu appears:
Figure 2 ORCA Main Menu Screen
NOTE: ORCA appearance, functionality, and keystrokes might differ between Smart Array
controllers. This document provides a generic procedure using a Smart Array P410i controller
as an example. Always follow the on-screen prompts when using ORCA.
From the main menu, you can use ORCA to create, view, or delete logical drives.
Using Option ROM Configuration for Arrays (ORCA) 27