HP Session Allocation Manager (HP SAM) v.3.1 Administrator's Guide

NOTE: The option to perform a power cycle from the connection bar is disabled by default in the
Global Policy. The following requirements must be met for Power Cycle:
—A certificate from the domain certificate authority must be installed on the HP SAM Web site to
allow usernames and passwords to be transmitted to the server.
—Version 4.20 or later Integrated Administrator (IA) software must be used on the HP BladeSystem
PC Blade Enclosure(s). By default, the IA software has a disabled SAM account. You must enable
this SAM account and create a password for the powercyle option to work.
—The IA password for the built-in SAM account must be saved in HP SAM on the Manage Data
Centers page.
—One of the following HP BladeSystem Blade PCs is required:
◦ HP BladeSystem bc2000 Blade PC
◦ HP BladeSystem bc2200 Blade PC
◦ HP BladeSystem bc2500 Blade PC
◦ HP BladeSystem bc2800 Blade PC
Smart Card Settings
NOTE: Smart card settings are not valid for Blade Workstation Client series or Linux Client.
●
SmartCardAlways—integer value, 0 or 1. Allows user to use smart card to enter credentials
and log in. If UiMode = 0 or 1, user has option of using smart card to log in. If UiMode = 2, user
must log in with smart card. See “UiMode” in
User Interface Customization Settings
on page 40. Default is 1 (allow).
●
SmartCardRequiresClick—integer value, 0 or 1. Set to 1 to require that the user click Connect
after a smart card is detected. Changing this to 0 automatically initiates a connection when the
user inserts a recognized smart card. Default is 1.
●
SmartCardCSP—string value. The CSP to use for accessing the smart card. This must match
exactly the name of the CSP installed on the machine. Default is “ActivCard Gold Cryptographic
Service Provider.” For example: for ActivClient 6.x, use “ActivClient Cryptographic Service
Provider”.
●
SmartCardUidType—integer value, 1 or 8. The Type field in the smart card certificate
properties enumeration, to use for determining the user UPN name. Value of 8 is
CERT_NAME_UPN_TYPE. If set to 8, you must specify SmartCardUidOid. Default is 1
(CERT_NAME_EMAIL_TYPE).
●
SmartCardUidOid—string value. The OID associated with the entered SmartCardUidType. Not
all Types require an OID. An entry is required is SmartCardUidType=8. Default is blank.
●
SmartCardAutoDisconnect—integer value, 0 or 1. If set to 1, automatically disconnect the
session when the smart card is removed. Note that Active Directory policy settings may affect
the actual behavior of this property. Active Directory options include leave as is, password lock,
and log off. Active Directory does not include a disconnect option, so you must use
SmartCardAutoDisconnect for that functionality. Default is 1.
ENWW
Install and Validate the HP SAM Client Software
39