HP Session Allocation Manager (HP SAM) v.3.1 Administrator's Guide

Install and enable one or both of the following:
●
RGS Sender 5.1.3 or higher with Single Sign-on enabled
●
Terminal service enabled—RDP
Access Device Requirements
The following sections provide information about the requirements for access devices.
Thin Client
Hardware Requirements
●
HP Compaq t5720 thin client (with Windows XP Embedded operating system)
●
HP Compaq t5730 thin client (with Windows XP Embedded operating system)
●
HP Compaq T5730w (with Windows Embedded Standard (WES) operating system)
●
HP t5630 thin client (with Windows XP Embedded operating system)
●
HP T5630w (with Windows Embedded Standard (WES) operating system)
●
HP T5740 thin client (with Windows Embedded Standard (WES) operating system)
●
HP t5135 thin client (with HP ThinConnect embedded operating system)
●
HP t5145 thin client (with HP ThinConnect embedded operating system)
●
HP t5545 thin client (with HP ThinPro operating system)
●
HP t5745 thin client (with HP ThinPro operating system)
●
HP gt7725 thin client with (with HP ThinPro GT operating system)
●
HP gt7720 (with Windows XP Embedded operating system)
●
HP gt7720w (with Windows Embedded Standard operating system)
If the HP SAM client is preinstalled, you need only to configure the HP SAM client to connect to the
appropriate HP SAM Web server.
Software Requirements
Install and enable one or both of the following:
●
RGS Receiver 5.1.3 or later
●
RDP
Mobile Thin Client
Hardware Requirements
●
HP Compaq 6720t Mobile Thin Client (with Windows XP Embedded operating system)
●
HP Compaq 2533t Mobile Thin Client (with Windows XP Embedded operating system)
●
HP Compaq 4410t Mobile Thin Client (with Windows Embedded Standard (WES) operating
system)
20 Chapter 2 Requirements ENWW