Installation Guide

Verifying Base-VxFS-51 Installation
Verify the Base-VxFS-51 installation on your system by entering the following command:
# swverify Base-VxFS-51
For more information on the supported options, see swverify (1M).
Installing HP OnlineJFS (B3929HB)
The HP OnlineJFS (B3929HB) license enables additional VxFS functionality not available with
Base-VxFS-51.
You can install HP OnlineJFS (B3929HB) either in the non-interactive or in the interactive mode.
NOTE: Base-VxFS-51 must be installed on your system before installing HP OnlineJFS. Otherwise
the installation of HP OnlineJFS may fail with an error.
Installing HP OnlineJFS (B3929HB) in Non-Interactive Mode
Enter swinstall command in non-interactive mode, as follows:
# swinstall -s <depot-path> B3929HB
For more information on the supported options, see swinstall(1M).
Installing HP OnlineJFS (B3929HB) in the Interactive Mode
To install HP OnlineJFS (B3929HB) in the interactive mode, complete the following steps:
1. Enter the swinstall command in interactive mode, as follows:
# swinstall -s <depot-path>
2. Mark the B3929HB bundle on the SD Install Window.
3. Select Actions, and click Install. Follow the on-screen instructions to complete the installation.
Verifying HP OnlineJFS (B3929HB) Installation
Verify the installation of OnlineJFS (B3929HB) on your system by entering the following command:
# swverify B3929HB
For more information on the supported options, see swverify(1M).
Installing VxVM 5.1 SP1
VxVM 5.1 SP1 consists of the Base-VxVM-51 and Full VxVM (B9116EB) bundles. The following
sections discuss the installation of these bundles using the HP-UX SD commands.
NOTE: After installing VxVM 5.1 SP1, if there were any prior VxVM versions that had unbundled
Array Support Library (ASL) packages installed, the new unbundled ASL packages will not be
automatically installed with 5.1 SP1. You must download and install 5.1 SP1 unbundled ASLs
separately or swcopy VxVM 5.1 SP1 together with VxFS 5.1 SP1 and ASL packages into a single
depot and install the depot. The ASLs bundled together with the base product will be updated
automatically. For more information on ASLs, see the Hardware Compatibility List (HCL) available
on HP Business Support Center.
NOTE: When installing VxVM 5.1 SP1 on a system containing an earlier version of VxVM, any
earlier version of VxVM will be removed automatically as part of the post-install configuration.
Installing Base-VxVM-51
You can install Base-VxVM-51 either in the non-interactive mode or in the interactive mode.
Installing VxVM 5.1 SP1 29