User's Guide

3. Skip this step if you are not using the DR Rehearsal feature.
If the rehearsal feature is configured, then provide the following information of the filesystem
and volume group used as a state directory:
Volume group name
mount point
logical volume name
Filesystem type
mount and unmount options
fsck options
For example:
vg ccvg
fs_name /dev/ccvg/lvol1
fs_directory /opt/cmconcl/statedir
fs_mount_opt "-o rw"
fs_umount_opt ""
fs_fsck_opt ""
fs_type "vxfs"
For more information about DR Rehearsal feature, see “Performing Recovery Group Rehearsal
in Continentalclusters” (page 45).
4. Specify a name for the ccmonpkg log file using script_log_file parameter.
script_log_file /etc/cmcluster/ccmonpkg/ccmonpkg.log
5. Validate the package configuration file.
# cmcheckconf P ccmonpkg.conf
6. Apply the package configuration.
# cmapplyconf P ccmonpkg.conf
After the monitor package is created, if the value of any parameter has to be changed, then edit
this package configuration file and re-apply it.
Migrating the Legacy Monitoring Package to a Modular Style Package in Continentalclusters
A.08.00
With Continentalclusters version A.08.00, the monitoring daemon ccmonpkg that was previously
configured as a legacy package can be migrated to a modular style package.
Complete the following steps to migrate the monitoring package, ccmonpkg, to a modular package:
1. Halt the monitoring daemon package.
# cmhaltpkg ccmonpkg
2. Generate the modular configuration file.
# cmmigratepkg -p <package_name> -o <modular__ccmonpkg.conf>
3. Validate the package configuration file.
# cmcheckconf P modular_ccmonpkg.conf
4. Apply the package configuration.
# cmapplyconf P modular_ccmonpkg.conf
5. Start the monitoring daemon package.
# cmmodpkg -e ccmonpkg
66 Designing Continentalclusters