User's Manual

Configuration 31
6.
Under Key Manager Configuration, enter the group name created previously in the HP ESKM in the
Group field.
7. Under ESKM Administrator Account, complete the following fields using the deployment username and
password created earlier on the HP ESKM.
a. Login Name: Enter the deployment account username.
b. Password: Enter the deployment account password.
8. Click Update ESKM. A confirmation screen appears indicating the configuration was saved and
connected successfully.
Configuring the controller (remote mode)
1. Open Encryption Manager ("Opening Encryption Manager" on page 33).
2. Click Perform Initial Setup.
A new screen appears.