User Manual

SP88W8782UMA0 2.4 GHz v2.0 (SDGOB-1291,
1150-7959)
WLAN Module
Copyright © 2012 Marvell Doc. No. MV-SR00222-13 Rev. –
February 3, 2012, 1.00 Document Classification: Proprietary Page 3
PRODUCT OVERVIEW
The Marvell
®
SP88W8782UMA0 2.4 GHz v2.0
(SDGOB-1291, 1150-7959) is an embedded WLAN
802.11n/g/b radio module. It is designed to be fixed
inside a printer product through a multi-pin digital
interface connector and mounting brackets.
The module is intended to be factory installed into an
enclosed product. The module is a PCB consisting of the
Marvell 88W8782U 1x1 SISO IEEE 802.11n/g/b WLAN
SoC, host connector interface, RFIC switches, passive
discrete components, and integrated passive printed
circuit antennas.
The embedded module operates under the control of the
host printer in order to provide wireless network
connectivity to other compatible devices using the IEEE
802.11n/g/b Wi-Fi standards. It is capable of operating in
the 2.412–2.472 GHz frequency band.
The module requires DC power and configuration from
the host printer in order to operate. Please refer to the
printer’s user’s manual for more details.
This product is for indoor use only.
General Features
 IEEE 802.11n/g/b compliant
 Dual antenna supporting diversity
 USB 2.0 host interface
Chipset
 Marvell 88W8782U
Security
 WEP 64- and 128-bit encryption with hardware TKIP
processing (WPA)
 AES-CCMP hardware implementation as part of
802.11i security standard (WPA2)
Radio Characteristics
 802.11n
• Up to 13 channels (HT20)
• Up to 9 channels (HT40)
• MCS0–MCS7 (OFDM)
 802.11g
• Up to 13 channels
• 64QAM/16QAM/QPSK/BPSK/CCK (OFDM, DSSS)
 802.11b
• Up to 14 channels (Japan)
• 64QAM/16QAM/QPSK/BPSK/CCK (OFDM, DSSS)
Software
 Linux supported with drivers based on Fedora
Core 13