User's Manual

5. Slide the paper guides firmly against the edges of the envelopes.
6.
Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties,
Options, Printer Setup, Printer, or Preferences.
7. Select the appropriate options.
On Paper/Quality tab select the appropriate paper type and print quality from the
Media drop-down list.
8. Click OK, and then click Print or OK in the Print dialog box.
Tips for print success
To successfully print, the HP cartridges should be functioning properly with sufficient ink,
the paper should be loaded correctly, and the product should have the appropriate
settings.
Ink tips
•
Use genuine HP ink cartridges.
•
Install the yellow, magenta, cyan, and black cartridges correctly.
For more information, see
Replace the cartridges.
•
Check the estimated ink levels in the cartridges to make sure there is sufficient ink.
For more information, see
Check the estimated ink levels.
•
For more information, see
Improve print quality.
•
If you are seeing ink smears on the back of the pages that you printed, use the Tools
menu to clean.
◦
From the home screen, which displays Copy, Scan, and Quick Forms, press the
Setup button.
NOTE: If you do not see the home screen, press the Back button until you
can see it.
◦
Scroll through the Tools menu until you see Clean Ink Smear, then select OK.
◦
Follow the onscreen instructions.
Paper loading tips
•
Load a stack of paper (not just one page). All of the paper in the stack should be the
same size and type to avoid a paper jam.
•
Load paper with side to be printed on facing down.
•
Ensure that paper loaded in the paper tray lays flat and the edges are not bent or
torn.
Chapter 3
14 Print
Print
DRAFT