User's Manual

6. Select the appropriate options.
•
On Layout tab select Portrait or Landscape orientation.
•
On Paper/Quality tab select the appropriate paper type and print quality from
the Media drop-down list.
NOTE: For maximum dpi resolution, go to the Paper/Quality tab and select
Photo Paper, Best Quality from the Media drop-down list. Then go to the
Advanced tab and select Yes from the Print in Max DPI drop-down list. If you
want to print Max DPI in grayscale, select High Quality Grayscale from Print in
Grayscale on the drop-down list, and then select Max DPI, after selecting Photo
Paper, Best Quality.
7. Click OK to return to the Properties dialog box.
8. Click OK, and then click Print or OK in the Print dialog box.
NOTE: Do not leave unused photo paper in the input tray. The paper might start to
curl, which could reduce the quality of your printout. Photo paper should be flat
before printing.
Print documents
To print from a software application
1. Make sure the paper tray is open.
2. Make sure you have paper loaded in the paper tray.
See Load media for more information.
3. From your software application, click the Print button.
4. Make sure the product is the selected printer.
5. Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties,
Options, Printer Setup, Printer, or Preferences.
6. Select the appropriate options.
•
On Layout tab select Portrait or Landscape orientation.
•
On Paper/Quality tab select the appropriate paper type and print quality from
the Media drop-down list.
Chapter 3
12 Print
Print
DRAFT