User's Manual

On Button Light
Light behavior Solution
Off The device is powered off.
Pulsing Indicates the device is in sleep mode.
The device automatically enters sleep
mode after 5 minutes of inactivity.
Fast blinking Error has occurred. Refer to messages
on printer display.
On Printer is on and ready to print.
Auto Power-Off
Auto Power-Off is automatically enabled by default when you turn on the printer. When
Auto Power-Off is enabled, the printer automatically turns off after 2 hours of inactivity to
help reduce energy use. Auto Power-Off is automatically disabled when the printer
establishes a wireless or Ethernet (if supported) network connection. You can change the
Auto Power-Off setting from the control panel. Once you change the setting, the printer
maintains the setting. Auto Power-Off turns the printer off completely, so you must use
the power button to turn the printer back on.
To change Auto Power-Off setting
1. From the Control Panel home screen, which displays Copy, Scan, and Quick Forms,
press the Setup button.
NOTE: If you do not see the home screen, press the Back button until you can
see it.
2. From the Setup menu on the printer display, select Auto Power-Off.
3. From the Auto Power-Off menu select Enabled or Disabled, and then confirm the
setting.
TIP: If you are printing over a wireless or Ethernet connected network, Auto Power-
Off should be disabled to ensure that print jobs do not get lost. Even when Auto
Power-Off is disabled, the printer enters Sleep mode after 5 minutes of inactivity to
help reduce energy use.
Auto Power-Off 9
Get to know the HP All-in-One
DRAFT