User's Manual

Index
A
actual data transfer rate, 25
adapter
bus width, 25
channels, 71
connecting external peripherals, 17
data transfer rate, 71
dimensions, 71
external terminator, 18
flash ROM, 71
installing, 16
maximum data transfer rate, 24
determining in BCH menus, 31
maximum dew point temperature, 71
maximum disks per channel, 71
OLAR of, 45
operating temperature range, 71
overview of, 11
path
determining in BCH menus, 29
determining, inioscanoutput, 20
PCI specification, 71
PCI-X bus connector type, 71
power required, 71
preparing for installation, 13
processor type, 71
regulatory statements, 73
relative humidity, 71
safety characteristics, 72
SCSI bus termination, 71
SCSI parameters, setting to default values, 44
serial EEPROM, 72
signaling, 71
storage and shipping temperature range, 71
verifying installation of, 20, 44
B
BCH menus
adapter’s maximum data transfer rate
determining, 31
adapter’s path, determining, 29
adapter’s SCSI parameters, setting to default values,
44
bus width, 25
C
commands
insf, 21, 52
ioscan, 20
determining adapter’s path, 20
scsi
maximum data transfer rate, determining, 31
setting SCSI parameters to default values, 44
what, 63
D
data transfer rate
actual, 25
maximum, 24
device files
missing, 21, 52
disk array in multi-host environment, 44
Domain Validation, 53
fallback levels, 54
driver
installing
steps for, 14
sources of, 14
verifying installation of, 20, 44
E
Event Monitoring Service (EMS), 61
external peripherals, connecting, 17
external terminator, 18
H
hardware monitor, 62
I
insfcommand, 21, 52
installation
connecting external peripherals, 17
LUN 0, 44
of adapter, 16
verifying, 20, 44
of driver
steps for, 14
verifying, 20, 44
OLAR, 45
performance recommendations, 45
preparing for, 13
verifying, 20, 44
ioscancommand, 20
determining adapter’s path, 20
L
LUN 0, 44
M
maximum data transfer rate, 24
determining
in BCH menus, 31
missing device files, 21, 52
O
OLAR
overview of, 45
overview
of adapter, 11
of OLAR, 45
83