User's Manual
Table Of Contents
- Introduction / Requirements
- Installation
- Login
- Keycode Entry
- Hardware Configuration
- Printers / Queues
- The Configuration Wizard
- Create Queue
- Create Printer Cluster
- Preferences
- Menu Bar Options
- Reprocontrol.client main applications
- Filter Editor
- Functions and Structure of the Filter Editor
- Preview of the Filter Editor
- Histogram
- Tab Black and White Point (Color Mode without Color Management)
- Tab Postprocessing (Black & White Mode)
- Tab Gamma Correction (Color Mode without Color Management)
- Tab Enhancement (Color Mode with Color Management)
- Tab Special Filter (All Modes except of Black & White Mode)
- Tab Color Adjust (Color Mode with Color Management)
- Tab Color Exchange (Color Mode with Color Management)
- Functions and Structure of the Filter Editor
- Reprocontrol.WinDriver
- Reprocontrol.monitor
- Costtracker
- Reprocontrol.backup
68
Tab Special Filter (All Modes
except
of
Black & White Mode)
This tab offers several methods to change the extent of sharpness of the whole image or of specific elements of
it.
None
If N
ONE is selected, no special filter is in use. All options are not accessible under these circumstances.
Adaptive Sharpness
This option reduces print raster.
By combining the smoothening and sharpening filters, ADAPTIVE SHARPNESS softens the image sections
with constant colors in order to make raster virtually invisible.
Object edges and text remain sharp and can even be sharpened.
You can enter values for the L
EVEL and LIMIT directly in the entry fields or move the white squares
corresponding to the “coordinates” of the filters in the diagram.
Level
You can s
et the level, or intensity, of the sharpening and softening filters individually. Picture sections with
poor contrast or image backgrounds are edited with the lower entry field, whereas the highly contrasted
sections, such as text and edges, are edited with the upper field.
0: max. smoothing
100: max. sharpening
Default value: 0 - 100