User's Manual
Table Of Contents
- Introduction / Requirements
- Installation
- Login
- Keycode Entry
- Hardware Configuration
- Printers / Queues
- The Configuration Wizard
- Create Queue
- Create Printer Cluster
- Preferences
- Menu Bar Options
- Reprocontrol.client main applications
- Filter Editor
- Functions and Structure of the Filter Editor
- Preview of the Filter Editor
- Histogram
- Tab Black and White Point (Color Mode without Color Management)
- Tab Postprocessing (Black & White Mode)
- Tab Gamma Correction (Color Mode without Color Management)
- Tab Enhancement (Color Mode with Color Management)
- Tab Special Filter (All Modes except of Black & White Mode)
- Tab Color Adjust (Color Mode with Color Management)
- Tab Color Exchange (Color Mode with Color Management)
- Functions and Structure of the Filter Editor
- Reprocontrol.WinDriver
- Reprocontrol.monitor
- Costtracker
- Reprocontrol.backup
18
Rotate
Without a checkmark at this option pictures are put out with their standard rotation determined by the
document.
If you check this option, you may choose among different rotations-types to be found in the drop down list:
When using AUTOMATIC (PAPER SAVE), the copy will be rotated so that paper can be saved during output.
If you want the output to be rotated without paper-save function, select a rotation degree. They are arranged
clockwise.
Alignment
Select the corresponding radio buttons if you want to have a L
EFT or RIGHT OFFSET on your print out. Alter
the size of the offset to determine the distance between the paper side’s border and image. Select the
CENTERED-radio button to set the image to the central position instead.
Rollwidth tolerance
If you want to allow print sizes that exceed the print width of your printer, you may define a new tolerated
width. Please bear in mind that this may cause a loss of certain areas of the image (especially at the width
borders).