User's Manual
Table Of Contents
- Introduction / Requirements
- Installation
- Login
- Keycode Entry
- Hardware Configuration
- Printers / Queues
- The Configuration Wizard
- Create Queue
- Create Printer Cluster
- Preferences
- Menu Bar Options
- Reprocontrol.client main applications
- Filter Editor
- Functions and Structure of the Filter Editor
- Preview of the Filter Editor
- Histogram
- Tab Black and White Point (Color Mode without Color Management)
- Tab Postprocessing (Black & White Mode)
- Tab Gamma Correction (Color Mode without Color Management)
- Tab Enhancement (Color Mode with Color Management)
- Tab Special Filter (All Modes except of Black & White Mode)
- Tab Color Adjust (Color Mode with Color Management)
- Tab Color Exchange (Color Mode with Color Management)
- Functions and Structure of the Filter Editor
- Reprocontrol.WinDriver
- Reprocontrol.monitor
- Costtracker
- Reprocontrol.backup
11
Depending on whether you are NOT going to install the
reprocontrol.server, you have to fill in the correct (DNS-)
name of the computer running reprocontrol.server and
its port. If reprocontrol.server has not changed the
standard port, it ought to be port 80. You may alter the
default port.
If you have to connect with SSL, you have to enter the
correct SSL-number instead. As a default, it ought to be
port 443. Please ask your server/print administration, if
you are not sure what to enter.
Just upon the actual installation of reprocontrol.server
starts, pay attention to a pop up-box that informs you
about the port number that is going to be used by
reprocontrol.server. Usually it should be port 80. If port
80 is already occupied by another application and
service, you have to define another free port.
Equivalently, you will be informed about the SSL-port
number if you have selected SSL previously in the
features selection.
Now the actual installation process begins.
Click F
INISH to complete the setup Program after successful installation.
Now you can start the software from the desktop with the program icon and from the start menu.
Make sure that the Windows user accounts have full access to the parameters folder. To get to this folder,
follow the app_data symbolic link in the installation folder. Usually, SCP parameters folders are set under
“C:＼Documents and Settings＼All Users＼Application Data＼SCP”. In Vista the folder is “C:＼Program
Data＼SCP”. To be granted further rights please ask your system administrator.