Owner's manual

3
Scan and copy
Basic scanning steps
Basic copying steps
Scan two-sided originals
Scan a card in the card slot
Load originals
Use the scanner buttons
Scan from HP Smart Document Scan Software
Scan from other software programs
Basic scanning steps
The basic steps for scanning are:
1. Load the originals. For more information, see Load originals.
2. Do one of the following:
–Use the Select Profile Number (
) button on the scanner front panel to select
a profile, and then press the Scan Document To (
) button.
For information about profiles, see Set up profiles.
Open HP Smart Document Scan Software. For more information, see Scan
from HP Smart Document Scan Software.
Open another scanning software program. For more information, see Scan from
other software programs.
Tip Descriptions of the profiles can be found in the HP Smart Document Scan
Software, on the profile label on the pull-down tray on the front of the scanner, or
in the Button Settings Utility.
Basic copying steps
The basic steps for copying are:
1. Load the originals. For more information, see Load originals.
2. Use the Number of Copies (
) button on the scanner front panel to select the
number of copies, and then press the Copy (
) button.
Copies are printed on the computer's default printer.
Scan two-sided originals
The steps for scanning or copying two-sided originals are the same as for one-sided
originals. In the HP Smart Document Scan Software, select Duplex (for two-sided
printing). The scanner processes both sides of the original in one pass.
12 HP Scanjet 7800 Scanner