User's Manual

Figure 8 Select Storage window
.
Adding a storage group
To add a storage group, complete the following steps:
1. Enter a convenient name (optional) of the storage group in the Storage Group box.
2. Enter the number of storage devices in this group in the Storage Count box. The number must be
between 1 and 100.
3. Select the storage model from the Storage Model drop-down list.
If required, select the number of fabric connections for each server in the Fabric Connections for
each Storage Model drop-down list.
4. Click the Add Storage Group button to add this group.
The storage group is listed in the storage group table.
NOTE:
A Director switch may be picked up based on the value against
Fabric Connections for each Storage Model field in Select Storage tab.
Using SAN Designer20