User's Manual

6. Click the Add Blade System Group button to add this group.
The blade system group is listed in the Blade Group table.
NOTE:
The table contains the full and half height blade server values. The rows in the table displays
the values in full\half Height format. For example 12\1 under the heading "Count(F\H)"
indicates a selection of 12 full heights and 1 half height blade server.
Figure 7 Blade system group window
.
Modifying a server group
To modify a server group, complete the following steps:
1. On the Select Server/Blade window, click the Server group tab to view the server group details.
2. Select an added server group you want to modify. You can select the server group in one of the
following ways:
• From the Server group drop-down list
• From the Server Group table
3. Modify details of the server group per your requirements.
Using SAN Designer18