User's Manual

7. Click the Add Server Group button to add this group.
The server group is listed in the Server Group table.
Figure 6 Server group window
.
Adding a blade system group
To add a blade system group, complete the following steps:
1. On the Select Server/Blade window, click the Blade system group tab. The blade server group
details are displayed, as shown in Figure 7.
2. Enter a convenient name (optional) for the blade system group in the Blade system group box.
3. Select the blade system class from the Blade system class drop-down list.
NOTE:
Only C-Class blade servers are supported in SAN Designer 1.6.
Using SAN Designer16