User's Manual

Supported operating systems
Microsoft Windows system with any of the following operating systems:
• Microsoft Windows 2000 Server with Service Pack 4
• Microsoft Windows Server 2003 Standard or Enterprise edition
• Microsoft Windows XP Professional edition with Service Pack 3
• Microsoft Windows Server 2008 Enterprise Edition
• Microsoft Windows Server 2008 R2 Enterprise Edition
• Microsoft Windows Vista
Installing SAN Designer
To install SAN Designer, complete the following steps:
1. Download HP Storage SAN Designer 1.6 package from the following website:
http://h18006.www1.hp.com/storage/networking/sandesigner.html
2. Select a folder (for example, C:\temp) to save the SAN Designer install package.
3. Run the SANDesigner_Setup.exe install package to install SAN Designer files.
Review and accept the license agreement. By default, the SAN Designer files and documentation
are installed in the following location:
C:\Program Files\Hewlett-Packard\HP SAN Designer
NOTE:
Ensure that JRE1.5 or later is installed on the host.
Repairing and upgrading SAN Designer
To repair or upgrade the currently installed SAN Designer software, complete the following steps:
1. Run the SANDesigner_Setup.exe setup executable file.
2. Select Repair - Reinstall all features installed to repair the current installation.
Removing SAN Designer
To remove SAN Designer software, complete the following steps:
1. Select Start > Settings > Control Panel > Add or Remove Programs.
2. Select HP Storage SAN Designer v1.6.00 from the list of Currently installed programs.
3. Click Change/Remove to remove the software.
Installing and removing SAN Designer10