Installation Instructions

2. Connect the other end of the cable to the high-denition TV or monitor.
3.
Press the Windows key + p to cycle through one of four display states:
● PC screen only: View the screen image on the computer only.
● Duplicate: View the screen image simultaneously on both the computer and the external device.
● Extend: View the screen image extended across both the computer and the external device.
● Second screen only: View the screen image on the external device only.
Each time you press the Windows key + p, the display state changes.
NOTE: For best results, especially if you choose the Extend option, increase the screen resolution of
the external device, as follows. Select the Start button, select Settings, and then select System. Under
Display, select the appropriate resolution, and then select Keep changes.
Setting up HDMI audio
HDMI is the only video interface that supports high-denition video and audio.
Turn on HDMI audio
After you connect an HDMI TV to the computer, you can then turn on HDMI audio by following this procedure.
1. Right-click the Speakers icon in the notication area, at the far right of the taskbar, and then select
Playback devices.
2. On the Playback tab, select the name of the digital output device.
3. Select Set Default, and then select OK.
Return audio to computer speakers
Follow these steps to return the audio stream to the computer speakers.
Using video 23