User Manual

3-5
Getting Started With Access Point Configuration
Tasks for Your First Web Browser Interface Session
Getting Started With Access
Point Configuration
Tasks for Your First Web Browser
Interface Session
The first time you access the Web browser interface, there are a number of
basic tasks that you should perform. Table 3-1
lists these essential tasks. For
specific instructions on the how perform the procedure, refer to the page
number listed in the right column.
In setting up your access point for network installation, this manual covers
many of the tasks that should be considered for proper security and manage-
ment.
Each of these tasks are detailed in their respective sections, however, this
summary is provided as an aid for establishing your network.
Table 3-1. Basic Web Interface Tasks
Default Configuration Parameters
Table 3-2 lists some of the default settings with which the access point is
configured, including the basic IP address and wireless configuration param-
eters. Information on how to update each parameter is provided later in this
guide.
To Learn How to Do This Task Refer to
Change the default password “Changing the Management Password” on page 5-3
Set the correct country code “Configuring Basic Settings” on page 4-1
Control access to the wireless network “Controlling Access to the Wireless Network” on
page 4-22
Setting WLAN security to utilize WPA/WPA2 “Configuring the Security Settings” on page 4-7