User's Manual

Index – 3
Index
location for the access point, considerations … 2-4,
4-3
lock
location on access point … 1-5
M
MDI-X to MDI network cable … B-3
MDI-X to MDI-X network cable … B-4
mounting the access point
on a horizontal surface … 2-9
on a wall … 2-7
precautions … 2-7
N
network cables
10/100Base-TX connections … 2-4
required types … 2-4
twisted-pair connector pin-outs … B-2
twisted-pair, wiring rules … B-2
network devices
connecting to the access point … 2-10
network ports
connecting to … 2-10
location on access point … 1-6
standards compliance … A-2
types of … 2-4, 4-2
non-standard network cables, effects … 5-2
O
out-of-band console access … 3-9
P
parts, included with the access point … 2-1
passwords
deleting with the Reset button … 3-8
if you lose the password … 3-8
physical specifications, access point … A-1
Ping test … 5-7
pin-outs
twisted-pair cables … B-2
PoE power connector
location on back of access point … 1-5
port LEDs
normal operation … 2-6
ports
10/100Base-TX, location on access point … 1-5
connecting to … 2-10
console … 2-11
network connections … 2-10
power connector … 1-6
Power LED … 1-4
behavior during factory default reset … 5-9
behavior during self test … 2-6
behaviors … 1-4
location on access point … 1-3
power source
connecting the access point to … 2-9
precautions
mounting the access point … 2-3
power requirements … 2-3
preparing the installation site … 2-4
Proactive Network tools
diagnostics with … 5-5
R
recycle statements … D-1
regulatory statements … C-9
Reset button
description … 1-7
location on access point … 1-7
to delete password protection … 3-8
resetting the access point
factory default reset … 5-8
location of Reset button … 1-7
troubleshooting procedure … 5-6
S
safety and regulatory statements … C-1
safety specifications … A-2
self test
LED behavior during … 2-6
Power LED behavior … 2-6
Self Test LED
behavior during self test … 2-6
serial cable
for direct console connection … 2-12
sides of access point
antennas … 1-5