Hardware Reference Manual

15. If you want to secure the access door, tighten the security screw and slide the decorative panel
forward (2).
NOTE: You must use a T-10 tamper-resistant Torx screwdriver available from HP to tighten
the security screw.
16. Replace the rear I/O cover by placing the hooks on the bottom of the cover into the slots on the
bottom of the chassis (1). Then rotate the top of the I/O cover up so that it snaps securely onto
the chassis (2).
17. Reconnect the power cord and press the power button.
Removing and Installing a Hard Drive 49