hp workstations - hp-ux 11.x graphics administration guide

configuring X Windows on HP-UX (other graphics cards)
features
Chapter 3 63
Depth
The default depth of the visual can be set in the Screen section of the
XF86Config file using the DefaultDepth option. The following example
sets the default depth to 24.
X*screens File Example:
Screen /dev/crt
DefaultVisual
Depth 24
XF86Config File Example:
Section ìScreenî
. . .
DefaultDepth 24
. . .
EndSection
The following depth may be selected as the default depth: 24.
minimum monitor power save level option
See the section on “Extensions: Display Power Management Signaling”
for more details on this option.
HPCursorScaleFactor <n>
See the section “Features: Cursor Scaling” for more details regarding this
option.
NoServerLogging
See the section “Features: Logging and Verbosity” for more details.
DisableGlxVisuals
This can be accomplished by not loading the GLX driver in the Modules
section. See the example below.
Section ìModuleî
#Noload ìglxî
EndSection
GAG11.book Page 63 Tuesday, February 14, 2006 9:11 AM