Compaq StorageWorks Fibre Channel Troubleshooting Guide

StorageWorks RAID Array 4000 and 4100 Troubleshooting Flow Charts 4-7
Some Fibre Channel Array Controllers Are Detected
Begin
Run the Fault Isolation utility.
Determine which ALPAs are
not shown by the utility.
Check
seating of the Fibre
Channel Array
Controller. Check to
make sure the power
supply is secure and
the power source is
active.
Is the Active LED
blinking on the Fibre Channel
Array Controller not returning an ALPA?
See Appendix A for the location
of the LED.
C
No
Ye s