Compaq StorageWorks Fibre Channel Troubleshooting Guide

Diagnostics 3-3
■ Tape Drive
 Test Unit Ready: queries the changer to see if a good status is returned
 Buffer Test: writes and reads from the tape drive's onboard cache
 Firmware Upgrade: will upgrade the firmware of the tape drive
■ FCTC
 Firmware Upgrade: will upgrade the firmware of the FCTC and the FCTC II
Installing Compaq Fibre Channel Diagnostics for
Windows CE
Compaq Fibre Channel Diagnostics for Windows CE is available on the SmartStart and Support
Software CD. It is bundled with the Compaq Diagnostics for Windows 95/98. Create the
installation diskettes by following the SmartStart instructions.
To install the utility:
1. Remove all previous versions of Compaq Diagnostics for Windows 95/98.
a. Select Start, Settings, Control Panel.
b. Select Add/Remove Programs.
c. Select Compaq Diagnostics for Windows 95/98 and "Add/Remove."
2. Install this version of Diagnostics for Windows 95/98.
a. Insert diskette #1 into drive A:
b. Run A:\SETUP.EXE
c. Select Next.
d. Select Finish.
3. Copy the FCDIAGCE.EXE file located in the CPQDIAGS directory.