Compaq StorageWorks Fibre Channel Troubleshooting Guide

2 Compaq StorageWorks Fibre Channel Troubleshooting Guide
FFIU See Fibre Channel Fault
Isolation Utility
Fiber Channel Tape Controller II
description 1-20
Fibre Channel Arbitrated Loop See
FC_AL
shown unitialized 2-6
Fibre Channel cable option kits
description 1-11
Fibre Channel Disk Array
Controller 2-3
Fibre Channel Fault Isolation
Utility
information and updates 2-6
installing 2-1
main display 2-2
program displays 2-2
purpose 2-1
Fibre Channel Fault Isolation
Utility: 2-1
Fibre Channel Host Adapter
64-Bit/66-MHz defined 1-6
Fibre Channel loopback plug
illustrated 4-17
Fibre Channel Loopback test
primary storage flowchart 4-17
Fibre Channel secondary storage
system
defined 1-17
Fibre Channel status light
rear panel A-7
Fibre Channel Storage 12
flexibility 1-18
Fibre Channel Storage Hub 12 1-9
description 1-17
features 1-18
illustrated 1-18
replacement procedure 1-22
Fibre Channel Storage Hub 12
Bypass Port LED
illustrated A-5
Fibre Channel Storage Hub 12 fault
LED
illustrated A-4
Fibre Channel Storage Hub 12
power-on LED
illustrated A-4
Fibre Channel Storage Hub 7 1-8
functional specifications 1-8
Fibre Channel Storage Hub 7
Bypass Mode LEDs
illustrated A-3
Fibre Channel Storage Hub 7 GBIC
Installed LEDs
illustrated A-3
Fibre Channel Storage Hub 7
LEDs A-3
illustrated A-3
Fibre Channel Switched Fabric
(FCSW) 1-20
Fibre Channel Tape Controller 2-3
description 1-19
detailed information 2-3
gigabaud link kodule 1-19
illustrated 1-19
product ID 2-3
product revision 2-3
replacement procedure 1-22
serial interface 1-19
shown missing 2-5
SNMP management
support 1-19
vendor ID 2-3
world wide name 2-3
Fibre Channel Tape Controller II
description 1-20
illustrated 1-20
Fibre Channel Tape Controller LED
location
illustrated A-6
Fibre Host Adapter
64-Bit/66-MHz,
illustrated 1-6
replacement procedure 1-12
Fibre Host Adapter/E
defined 1-5