Compaq StorageWorks Fibre Channel Troubleshooting Guide

2-2 Compaq StorageWorks Fibre Channel Troubleshooting Guide
Program Displays
The utility's main display is shown below. It displays each FC-AL from the perspective of the
server. All Fibre Host Bus Adapters in the server are shown with a slot number and indicate a
PCI (/P) or EISA (/E).
NOTE: The Enterprise Backup Solution only supports PCI Host Bus Adapters to ensure adequate
performance.
Each Fibre Channel Array and Fibre Channel Tape Controller is shown as a branch of the Fibre
Host Adapter that it is connected to. The Arbitrated Loop Physical Address (ALPA) is shown
for each Fibre Channel Controller.
Figure 2-1. The Fibre Channel Fault Isolation Utility’s Main Display