Compaq RAID Array 4000 Overview

Compaq RAID Array 4000 Overview 23
ECG0205699A
APPENDIX A: User Diagnostics Utility
Table 3 summarizes the steps required to run the Compaq User Diagnostics Utility on a Compaq
server, notebook computer, or handheld PC.
Table 3. Compaq User Diagnostics Utility for server, notebook computer, or handheld PC
Step Server Notebook Handheld PC
1. Take the server offline.
Use the Diskette Builder on the
Compaq SmartStart Support
Software CD 4.30 or later
containing the Windows 95 version
of the User Diagnostics Utility.
Use the Diskette Builder on the
Compaq SmartStart and Support
Software CD 4.30 or later
containing the Windows CE version
of the User Diagnostics Utility.
2. Boot the server from the Compaq
SmartStart and Support Software
CD 4.30 or later.
Use the diskette to install the User
Diagnostics Utility on the notebook
computer.
Use the diskette to install the User
Diagnostics Utility on a desktop
computer.
3. Run the Windows 95 version of the
User Diagnostics Utility.
Using a serial cable, connect the
notebook computer to the serial
port on the RA4000.
Using a serial cable, connect the
handheld PC to the desktop
computer.
4.
Run User Diagnostics on the
notebook computer.
Download User Diagnostics from
the desktop computer to the
handheld PC.
5.
Disconnect the handheld PC from
the desktop computer.
6. Using a serial cable, connect the
handheld PC to the serial port on
the RA4000.
7. Run User Diagnostics on the
handheld PC.