MSSC QM2 High Resolution Inkjet Printer Operation Guide QM2-101 MSSC, LLC Collinsville, IL USA QM2-111 Tel: 618-343-1006 Fax: 618-343-1016 www.msscllc.
1 Table of Contents Introduction..................................................................................................................................................2 Dimensions and Specifications ....................................................................................................................2 Installation....................................................................................................................................................3 Key Layout...........
2 Introduction Congratulations on the purchase of your new MSSC QM2 Industrial Inkjet Printer from MSSC, LLC. We are confident you will be very pleased with the operation and performance of this durable, quality built machine for many years to come. The QM2 Industrial Inkjet Printer operating manual provides the necessary information about the installation, operation, maintenance, and repair of your new inkjet printer.
3 Installation 1. Select the mounting location. Select a mounting location where there are guide bars on the conveyor. This will keep the print head at the correct distance of 1/8” (3mm) from the product preventing damage to the QM2. CAUTION: Avoid contact between the QM2 and the product as print quality may suffer. 2. Mount the base clamp to the conveyor or floor. Mount the QM2 to a solid structure such as a conveyor side rail.
4 4. Mount the QM2 to the bracketry. • • • • Place the base clamp on the bottom of the QM2 over the end of the vertical tubing and tighten to secure the print head. Adjust the print head by loosening the cross clamp with a 5/32” or 4 mm allen wrench. The QM2 should be perpendicular to the product. If the print head is angled print quality will suffer. Once the QM2 is in position tighten all screws on the clamps 5. Install a QM2 print cartridge. Power must be off to install and remove the print cartridge.
5 Key Layout Special Information and Display Type Change Language Selection and Special Character Menu Run Key Status Indicator Lights Escape Key Message Selection and Editing Date Printing Setup Message Entry Keys Serial Number Setup QM2 setup Alarm Reset Enter Key Navigation Keys MSSC, LLC Collinsville, IL USA Tel: 618-343-1006 Fax: 618-343-1016 www.msscllc.
6 Startup 1. Install your QM2 and QM2 ink cartridge according to the installation instructions a. CAUTION: Power must be off when installing or replacing a QM2 Ink Cartridge. b. CAUTION: The QM2 will only function with QM2 Ink Cartridges. 2. Plug QM2 into proper power receptacle and turn the QM2 on using the on/off switch. 3. The QM2 can display screen prompts in English, French, Spanish, German and Japanese. The unit is shipped with English as the default language.
7 Operation NOTE: Pressing the RUN key from any menu will return you to the main screen. However any unsaved changes will be lost. Settings Menu Language 1. From main screen press the FONT key. 2. Use the ↑ and ↓ keys to select desired language. 3. Press ↵ to select and return to the main screen. Setting Date and Time The QM2 will retain current date and time once set, like any other computer device. 1. From the main screen press the DATE key. 2. Using the arrow keys select TODAY and press ↵. 3.
8 D 2 Inserts the second digit of a 2 digit day format. 07-20-07 D X Inserts a 1 character date code. (See date and hour code table in the appendix) 07-K-07 H 1 Inserts the first digit of a 2 digit hour in 24 hour format. 14:53 H 2 Inserts the second digit of a 2 digit hour in 24 hour format. 14:53 H X Inserts a 1 character hour code. (See date and hour code table in appendix) E:53 M 1 Inserts the first digit of a 2 digit minute. 14:53 M 2 Inserts the second digit of a 2 digit minute.
9 Setup Menu To access the setup menu press the STUP key. Ink This sub menu allows the user to specify the ink cartridge volume as well as when the QM2 generates a low ink alarm. To set the ink volume: 1. Press STUP key 2. Select INK and press ↵. 3. Use the ↑ and ↓ keys to change highlighted field. 4. Type in the desired value, 42 ml for a new cartridge or 370 ml for the bulk ink system. 5. When done press ↵ to save the changes and return to the previous menu.
10 Common Parameters set at Factory MSG DELAY WIDTH HEIGHT DENSITY FONT DIRECT SPEED = = = = = = = = COMMON 000 mm 08 mm 13 mm 4 FONT 2 ←ABC 30.5 m/min DT Tune The DT Tune sub menu is where adjustments to date code formatting are made. The settings in this menu apply to all messages printing dates. • • MX SIZE: Sets the number of characters in month code. For a value of 2, a two digit number corresponding to the month is printed.
• • • • • • 11 CNT DOTS: Displays the number of dots in a message and the volume of ink needed for each printing. SEL NOZZL: This setting controls what channels are used to print. o AUTO: (Recommended) the QM2 selects the best nozzle configuration based on operating conditions. (300 DPI) o EVEN: Prints using the even channels. (300 DPI) o ODD: Prints using the odd channels. (300 DPI) o BOTH: Prints using both channels. (600 DPI) RS485: This submenu configures the QM2 communications.
12 Editing and Selecting Messages The QM2 has space for 100 different messages. To access the message menu press the MSG key. Editing/Creating Messages To create or edit a message: 1. From the main screen press the MSG key. 2. Select EDIT and press ↵. 3. Select the desired message number to create or modify and press ↵. A selection can be made using the ↑ and ↓ keys or by keying in the message number.
13 Inputting Chinese Characters (Available in English menus only) During message creation pressing the FONT key twice accesses the library of 30 simplified Chinese characters for insertion into a message. Use the arrow keys to select the desired character press ↵ to select and insert into the message. 30 simplified Chinese characters available for use in messages Creating or Editing 2 Line Text To create or edit 2 line text 1.
14 Maintenance The QM2 was designed to be easy to maintain for the user. However there are a few precautions: 1. Always turn off the QM2 before installing or removing an ink cartridge. 2. Never disassemble the QM2. There are no user serviceable parts inside. 3. Never drop or spray the QM2 with water or any other liquid. Installing Ink Cartridges 1. 2. 3. 4. 5. 6. 7. 6. 7. 8. 9. 8. Power off the QM2. Flip the blue locking lever down.
15 Adjusting Screen Contrast If the screen is difficult to read the contrast may need to be adjusted. 1. Remove cap plug from right side of machine. 2. Using a small flat blade screwdriver, rotate the adjustment screw clockwise to lighten or counterclockwise to darken. 3. When finished, replace the cap plug. MSSC, LLC Collinsville, IL USA Tel: 618-343-1006 Fax: 618-343-1016 www.msscllc.
16 HP Bulk Ink System Setup Note: Never exceed 10 inches (254 mm) height difference between printer cartridge and reservoir. Never hold reservoir above printer cartridge. Bulk Ink restraint set-up using the flange clamp Bulk Ink restraint set-up using the base clamp MSSC, LLC Collinsville, IL USA Tel: 618-343-1006 Fax: 618-343-1016 www.msscllc.
17 MSSC, LLC Collinsville, IL USA Tel: 618-343-1006 Fax: 618-343-1016 www.msscllc.
18 MSSC, LLC Collinsville, IL USA Tel: 618-343-1006 Fax: 618-343-1016 www.msscllc.
19 MSSC, LLC Collinsville, IL USA Tel: 618-343-1006 Fax: 618-343-1016 www.msscllc.
20 MSSC, LLC Collinsville, IL USA Tel: 618-343-1006 Fax: 618-343-1016 www.msscllc.
21 Appendix Feet/min. to meters/min Conversion Table ft/min 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 m/min 1.5 3.0 4.6 6.1 7.6 9.1 10.7 12.2 13.7 15.2 16.8 18.3 19.8 21.3 22.9 24.4 25.9 27.4 29.0 30.5 ft/min 105 110 115 120 125 130 135 140 145 150 155 160 165 170 175 180 185 190 195 200 m/min 32.0 33.5 35.1 36.6 38.1 39.6 41.1 42.7 44.2 45.7 47.2 48.8 50.3 51.8 53.3 54.9 56.4 57.9 59.4 61.
22 Key Assignments for Characters 1 @ A B C 2 a b c D E F 3 d e f G H I 4 g h i J K L 5 j k l English Language M N O 6 m n o Spanish language M Ñ O 6 m ñ o P Q R S 7p q r s T U V 8 t u v W X Y Z 9 w x y z * . , - / + = : ’ ( ) # 0 ! $ % & [ ] □ ■ MSSC, LLC Collinsville, IL USA Tel: 618-343-1006 Fax: 618-343-1016 www.msscllc.
23 Adjusting the Photo Eye In some instances, adjustment of the photo eye may be necessary to improve the performance of the QM2. The photo eye on the QM2 has an adjustment dial and indicator lights on the bottom to aid in adjustment. The green light indicates that the sensor is receiving power. The red light comes on whenever the sensor is tripped. Sample Message Instructions Follow the directions below to enter the above sample message. NOTE: to save space in the manual single key strokes are shown.
24 Accessories and Parts Mounting Hardware 55325 55335 55345 55355 Remote Print Head Mounting Kit Heavy Duty Mounting Clamps Heavy Duty Flange Clamp Heavy Duty Joint Clamp Bulk Ink System 55955 55950 Bulk Ink Restraint Bulk Ink System (370 cc); Standard Black Ink Cartridges 55900 55901 55902 55903 55904 55975 55350 Ink Cartridge (42 cc); Standard Black Ink Cartridge (42 cc); Red Ink Cartridge (42 cc); Green Ink Cartridge (42 cc); Blue Ink Cartridge (42 cc); Yellow Ink Cartridge (42 cc); VB Premium Bla
