User Manual - Microsoft Windows

Notice to users in the European Economic Area
This product is designed to be connected to the analog Switched
Telecommunication Networks (PSTN) of the European Economic Area
(EEA) countries/regions.
Network compatibility depends on customer selected settings, which
must be reset to use the equipment on a telephone network in a country/
region other than where the product was purchased. Contact the vendor
or Hewlett-Packard Company if additional product support is necessary.
This equipment has been certified by the manufacturer in accordance
with Directive 1999/5/EC (annex II) for Pan-European single-terminal
connection to the public switched telephone network (PSTN). However,
due to differences between the individual PSTNs provided in different
countries, the approval does not, of itself, give an unconditional
assurance of successful operation on every PSTN network termination
point.
In the event of problems, you should contact your equipment supplier in
the first instance.
This equipment is designed for DTMF tone dialing and loop disconnect
dialing. In the unlikely event of problems with loop disconnect dialing, it
is recommended to use this equipment only with the DTMF tone dial
setting.
Notice to users of the German telephone network
This HP fax product is designed to connect only to the analogue public-
switched telephone network (PSTN). Please connect the TAE N
telephone connector plug, provided with the HP All-in-One into the wall
socket (TAE 6) code N. This HP fax product can be used as a single
device and/or in combination (in serial connection) with other approved
terminal equipment.
Geräuschemission
LpA < 70 dB am Arbeitsplatz im Normalbetrieb nach DIN 45635 T. 19
Notice to users in Korea
ประกาศขอบังคับ 353