HP Designjet Z2100 Printing Guide [HP Raster Driver] - Create and Install an ICC profile [Windows]

• Select Next.

NOTE If you would like to use a longer drying time, you can ask the HP Color Center to create the

test chart without going on to create a profile (Print target only. Create ICC profile later).

Then, later, when the chart is completely dry, you can restart the HP Color Center and then create a

profile using the test chart you have already created (Create ICC profile from a target that has

already been printed).

In this case the spectrophotometer takes a while to warm up before it is ready to scan.

Choose ICC Profile Settings >

The ICC profile will be created and installed with the specified name and settings.