HP Designjet Z2100 Photo Printer Series - Quick Reference Guide

9. LED light - Indicates the printer's status. If the LED light is solid green, the device is ready. If it is
flashing green, the device is busy. If it is solid amber, there is a system error. If it is flashing amber,
the printer needs attention.
10. Front-panel display - Displays error, warnings, and information on using your printer.
To highlight an item in the front-panel display, press the Up or Down key until the item is highlighted.
To select an item in the front-panel display, first highlight it and then press the OK key.
When this guide shows a series of front-panel display items like this: Item1 > Item2 > Item3, it means that
you should select Item1, then select Item2, then select Item3.
Information about specific uses of the front panel can be found throughout this guide.
Printer software
The following software is provided with your printer:
●
The PCL3 raster driver, your main printer driver
●
The HP Easy Printer Care (Windows) or HP Printer Utility (Mac OS), see
Access HP Easy Printer
Care (Windows) or HP Printer Utility (Mac OS) on page 6, allows you to:
●
Manage the printer including color with the HP Color Center
●
View the status of the ink cartridges, the printheads, and the paper
●
View job accounting information, see Using your printer on DVD
●
Update the printer's firmware, see
Update the firmware on page 29
●
Change various printer settings (in the Settings tab)
●
The Embedded Web Server, runs in the printer and enables you to use a Web browser on any
computer to preform the HP-GL/2 Upgrade and to check ink levels and printer status, see
Access the
Embedded Web Server on page 7.
●
The RTL and HP-GL/2 driver for Windows, needed if you have the HP-GL/2 Upgrade
ENWW Printer software 3
Introduction