HP Designjet Z2100 Photo Printer Series - Quick Reference Guide

9. Select your paper category and type.
10. The printer checks the alignment and measures the width.
11. Look at the front panel; you may find some instructions there.
12. When the roll is aligned, the front panel displays the Ready message and the printer is ready to print.
If the role is not aligned, follow the instructions on the front-panel display.
13. If the paper is loose on the roll, lightly rewind from the end of the spindle until tight.
NOTE If you have an unexpected issue at any stage of the paper loading process, see Using
your printer on DVD.
Tip When prints fall into the basket, they can be torn or get ink marks from other prints. To avoid
this, catch your prints as they are cut from the roll and do not stack prints in the basket or turn off
the automatic cutter, see Using your printer on DVD, and use the Form feed and cut key to release
your print.
Paper menu procedure
As an alternative you can use the paper menu to start the paper loading process.
1. Follow steps one through four of the
Easy loading procedure on page 12.
2.
Press the Menu key to return to the main menu, select the Paper menu icon
.
14 Chapter 3 Paper handling ENWW
Paper handling