HP Designjet Z2100 Photo Printer Series - Quick Reference Guide

5. If the edge of the roll is not straight or torn (sometimes due to tape used to hold end of the roll), pull
paper slightly beyond the cutting grove and use a cutter to cut a straight edge.
CAUTION Cut the paper as straight as possible, as uneven paper does not load correctly.
6. Insert the edge of the paper into the feeder.
WARNING! Do not to push your fingers inside the printer's paper path, the results may be
painful.
7. Roll the spindle into the feeder until you feel resistance. The printer detects the paper and feed it
automatically into the printer.
8. Once the paper is fed into the printer, the front-panel display asks if you are loading a roll or a sheet.
Select Roll with the Up and Down keys and press OK.
ENWW Load a roll into the printer 13
Paper handling