HP Designjet Z2100 Photo Printer Series - Quick Reference Guide

To turn it back on, use the power switch at the rear.
When the printer is powered back on, it takes about three minutes to initialize and check and prepare the
printheads. Preparing the printheads takes about one minute and 15 seconds. However, if the printer has
been off for six weeks or more, preparing the printheads could take up to 45 minutes.
Tip It is strongly recommended to leave the printer powered on or in sleep mode to avoid
wasting ink and time.
Access HP Easy Printer Care (Windows) or HP Printer Utility
(Mac OS)
HP Easy Printer Care (Windows) or HP Printer Utility (Mac OS) enables you to manage your printer from
a computer with a USB connection and TCP/IP.
●
Under Windows, start HP Easy Printer Care from your desktop shortcut or from Start > All
Programs > Hewlett-Packard > HP Easy Printer Care > Start HP Easy Printer Care. This launches
HP Easy Printer Care showing the printers installed.
●
Under Mac OS, launch the Mac Printer Utility by selecting STARTUP_DISK > Library > Printers >
hp > Utilities > HP Printer Utility. This launches the HP Printer Selector where you need to add your
printer by clicking More Printers.
Select your printer and click Launch Utility. This launches the HP Printer Utility.
If you have followed these instructions but failed to get through to HP Easy Printer Care (Windows) or HP
Printer Utility (Mac OS), see Using your printer on DVD.
6 Chapter 2 Personalizing the printer ENWW
Personalizing the printer