HP Designjet Z6100 Printing Guide [PS Driver] - How to print a banner [Adobe Illustrator CS2 - Mac OS X]

1. First recommendations:

• I order to get a correct display, it’s also essential to have the monitor calibrated, refer to

the

Profile my monitor document.

• See the

Media type functionality & features and choose the most appropriate media.

• Ensure that the Paper Type setting on the front panel corresponds to the paper that you

intend to use. It is essential that the paper is correctly color calibrated for the printer; refer

to the

Calibrate my printer document.

• If the paper that you are using is not listed, we strongly recommend creating a new

Custom Paper Type, or if you cannot find a paper type that resembles yours closely

enough. You can add a custom paper automatically by using the HP Color Center; refer to

the

Add and profile a new paper type document.

2. Open Adobe Illustrator CS2.

3. Configure the Color Settings, Edit menu > Color Settings…:

• Make sure the Advance Mode is displayed.

• Working Space > RGB: Select the profile of the scanner or camera you have used to

get the photos (source profile), if you don’t have it, select Adobe RGB (1998).

• Working Space > CMYK: Europe ISO Coated FOGRA27 (for Europe), U.S. Web

Coated (SWOP) v2 (for US) and Japan Standard v2 (for Japan).

• Color Management Policies: Preserve Embedded Profiles.

• Profile Mismatches: Check Ask When Opening and Ask When Pasting.

• Missing Profiles: Check Ask When Opening.

• Conversion Options > Intent: Relative Colorimetric.