HP Designjet Z6100 Printing Guide [PS Driver] - How to ensure a print overnight [Adobe Illustrator CS2 - Windows]

8. Check the print draft; if it meets your expectations, you are ready to print your job. Print the

fist copy, Adobe Illustrator File menu > Print…:

• Choose driver settings, click Setup… button:

• Click Printer button and select your printer (ex. HP Designjet Z6100 44in Photo).

• Select the Number of copies you need.

• Click Preferences button: Select the same printer settings you choose in step 7.

• Click OK twice.

• Select the same application settings you choose in step 7 and click Print.

9. Check the first print copy in terms of quality.

• If the first copy is not OK, modify the appropriate settings and repeat step 8.

• If the first copy is OK, you can allow the printer to print all the desired copies overnight.

10. Check remotely the printer status and job status via Embedded Web Server. You can:

• Stop printing.

• Readjust the appropriate settings.

• Troubleshooting: Launch color calibration, paper profiling…

• Request e-mail notification of specific error conditions.

NOTE To use the Embedded Web Server, you must have a TCP/IP connection to your printer.