HP Designjet Z6100 Printing Guide [PS Driver] - How to do an art reproduction [Macromedia FreeHand MX - Mac OS X]

Table Of Contents

You should consider that each person has their own perception and their own subjective opinion

about the result; this is because there are various factors that can influence our opinions, such as the

type of art reproduction (portrait, landscape…), the source color space, the media used, the

environmental conditions, the subjective perception about your own image, etc.... This means the

printing suggestion may not completely match with your own personal opinion.

1. First recommendations:

• I order to get a correct display, it’s also essential to have the monitor calibrated, refer to the

Profile my monitor document.

• See the

Media type functionality & features and choose the most appropriate media.

• Ensure that the Paper Type setting on the front panel corresponds to the paper that you intend

to use. It is essential that the paper is correctly color calibrated for the printer; refer to the

Calibrate my printer document.

• If the paper that you are using is not listed, we strongly recommend creating a new Custom

Paper Type, or if you cannot find a paper type that resembles yours closely enough. You can

add a custom paper automatically by using the HP Color Center; refer to the

Add and profile

a new paper type document.

2. Open Macromedia FreeHand application.

3. Configure the Color Preferences, FreeHand MX menu > Preferences… > Colors tab:

• Color Management: Kodak Digital Science.

• Uncheck Rebuild Color Tables.