HP Designjet Z6100 Printing Guide [PS Driver] - Add and profile a new paper type [Windows]

Choose ICC Profile Settings >

The ICC profile will be created and installed with the specified name and settings:

• ICC Profile Name: Enter the name of your new profile.

• Load your new paper into the printer (A4/A size minimum).

• Click Next.

Calibrate Your Printer >

The printer will calibrate itself for use with your paper. The process takes about 10 minutes

and consists of the following steps:

• A calibration test chart is printed.

• The test chart is allowed to dry for a period of time, the amount of time will depend

on the paper type, and this is so that the colors have time to stabilize.

• The test chart is scanned and measured using the HP Embedded Spectrophotometer.

Print Profiling Chart and Install ICC profile >

When you have defined and calibrated a new paper type, the printer automatically creates

and installs the new ICC profile, to be used with your paper. The process takes about 15–20

minutes and consists of the following steps:

• A profiling test chart is printed.