HP Designjet Z6100 Printing Guide [PS Driver] - Add and profile a new paper type [Mac OS X]

7
Calibrate Your Printer >
• Load the new paper into the printer (A4/A size).
• Click Continue.
The printer will calibrate itself for use with your paper. The process takes about 10 minutes and
consists of the following steps:
• A calibration test chart is printed.
• The test chart is allowed to dry for a period of time, the amount of time depends on
the paper type, and this is so that the colors have time to stabilize.
• The test chart is scanned and measured using the HP Embedded Spectrophotometer.